Yeah, ok. Let me spell it out for you: F.A.L.S.E. F.L.A.G.

cell phones don't work on planes f-14 would shoot down 2nd plane any day of the week if there wasn't massive amounts of fuckery going on that day no plane in the field no video's of plane's from 17 camera's @ Pentagon missing gold from WTC vault - gold is an element and cannot 'melt' or 'vapourize' 2 trillion missing no WMD USA is a puppet state is the logical conclusion.

They're allergic to logic. They don't understand variables.

Why would you assume it was aluminum?

I call it what it was, controlled demolition.

How many litres of jet fuel did the plane have on board? How much steel could that heat? Surely not enough to heat all the supporting columns to the ground floor.

Sure lucky both towers came down or there may have been an investigation.

Pure oxygen, instead of air, is used to increase the flame temperature to allow localized melting of the workpiece material (e.g. steel) in a room environment. A common propane/air flame burns at about 2,250 K (1,980 °C; 3,590 °F),[2] a propane/oxygen flame burns at about 2,526 K (2,253 °C; 4,087 °F),[3] and an acetylene/oxygen flame burns at about 3,773 K (3,500 °C; 6,332 °F)

Torches that do not mix fuel with oxygen (combining, instead, atmospheric air) are not considered oxy-fuel torches and can typically be identified by a single tank (oxy-fuel cutting requires two isolated supplies, fuel and oxygen). Most metals cannot be melted with a single-tank torch. As such, single-tank torches are typically used only for soldering and brazing, rather than welding.

https://en.wikipedia.org/wiki/Oxy-fuel_welding_and_cutting [1]

Do you see that bold sentence? Without force feeding pure oxygen, not even a blowtorch can melt steel, and the fuel used in blow torches burns a lot hotter in air than even jet fuel.

The simple fact is, the colour of the flames coming out of the WTC shows they were burning at around 600o C. Firefighters in the middle of the WTC fires reported small fires that could easily be handled with a few hoses.

If the fires in the core of the WTC were hot enough to soften steel, no firefighter would have been able to get anywhere near those floors, and there certainly wouldn't have been identifiable bodies lying in the middle of it, as the firefighters reported.

You caught me, I only glance at the title...

Still though I doubt that theyd be able to differenciate between steel and an alloy that sorta looks like steel in that situation. From what you can see in the aireal photographs you most certainly cant, and in the end that is the only "data" I have here, since people recalling their memory isnt the most reliable source.

This SOUNDS like the correct answer at first, especially since a plane is about 90% aluminum. The problem is that aluminum doesn't melt in a orange molten state, it is completely silver.

This was brought up against the government when the fraudulent 9/11 commissions were going on. The government countered this fact by saying "it was molten aluminum mixed with office furniture" and never had a further response to the allegations.

As the video says: Molten metal , which could have been all sorts of stuff used in the building or the planes, and melts earlier than steel, such as aluminium, copper and the likes.

That was awesome.

That was great.